鹽霧腐蝕試驗箱的結構及材質介紹：
| 結構及材質 | 1.試驗室采用P.V.C聚氯乙稀板（），厚度5㎜，耐溫達 80℃。 |
| 2.試驗室密封蓋采用壓克力耐沖擊板（三菱），厚6㎜。 | |
| 3.試藥補充瓶采用隱藏式附水位透視窗，清洗容易，不易破裂。 | |
| 4.飽和空氣桶采用SUS#304不銹鋼耐高壓桶保溫效果Z佳。 | |
| 5.試驗室籃架采平面分度架，可任意調(diào)整角度，四面落霧及受霧方面*一致，試驗片放置數(shù)量多。 |
我公司鹽霧腐蝕試驗箱的PVC板材質厚度默認標準厚度5MM；
如您需要加厚，下單時請與我們技術顧問：；
Salt fog corrosion test box structure and materials is introduced ：
| Structure and material | 1. The lab P.V.C polyvinyl chloride board （Taiwan）, thickness 5 ㎜, temperature of 80 ℃. |
| 2. The lab hermetic seal acrylic impact resistance board （Japan mitsubishi）, thick ㎜ 6. | |
| 3. The bottle with a hidden planning to add water level perspective window, it is easy washing, is not easy to break. | |
| 4. Saturated air bucket USES SUS# 304 stainless steel bear high pressure bucket of the heat preservation effect is the best. | |
| 5. LABS in the frame of the plane points frame, can be arbitrary adjust the Angle, surrounded by fall fog and mist, wholly consistent, test piece placed quantity. |
I company salt fog corrosion test box of PVC sheet thickness of default standard 5 MM thickness;
If you need to thicken, order please contact with our technical adviser: ;
